JĘZYK / LANGUAGE / ЯЗЫК
ABOUT USNewsContactStudyGalleryGuideLogIn

OXIDECOR E

Specialist decorative compound – 100% natural oxidised look

Specialist coarse-grained decorative compound based on a natural oxidation process, metal particles, and a special formula. It guarantees a natural effect of an artistic oxidation process. The intensity, saturation, and variability of rust can be adjusted by the amount of special activating agent applied to the surface. Without preservation, Oxidecor E remains a "living" material: the surface corrosion process will continue and will stop only after applying a preservative.

Provides Designers with unlimited possibilities. Adds a raw decorative element and a touch of the past to the interior, goes well with various styles: provides modern interiors with expression and a sense of mystery, and adds authenticity to industrial interiors. Excellent with natural materials, such as metal, stone, glass, wood, and our decorative products such as Concretes (Art, Marmo, Micro), Corado, Cromo, Revello, Velluti, Metalfin, Lumicenta and Luna.

This decoration requires a system that includes: OXIDECOR E and Aktywator E Blue activating agent which provides an original corrosion effect. Each application results in a different reaction and contact with the surface due to numerous factors present at a given time, i.e. temperature, sunlight, humidity, drafts, etc. Each finish is unique and original!

Applications

Perfect for creating exquisite and special atmosphere in our flats, offices, in industrial buildings, and while designing conservatories. Recommended for all kinds of surfaces indoors and outdoors, walls, rusticated surfaces, gypsum-carton boards, metal, wood, wood imitation, plastic, etc.


Characteristics/Benefits

  • natural product
  • enables you to create individual, unique effects,
  • EXCELLENT resistance to impact,
  • good filling properties, durable and practical,
  • good adhesiveness to various substrates,
  • resistant to scrubbing – used in a system.


General application principles

All work on a given substrate should be performed and finished with products from the same production batch, with the same serial number, as there may be slight differences in the base that may affect the final colour and effect. The instructions to perform the work in a professional manner are based on basic occupational health and safety rules, and guidelines described in the following sheets: technical, application system, adapting work to conditions (i.e. temperature, humidity, drafts, etc.), and proper surface preparation.

Before we begin painting, it is very important to verify the technical condition of the substrate and follow the guidelines related to its proper preparation. The substrate should be: stable, dry, cleaned, all cavities should be filled and any fungi should be removed if necessary. Dust must be removed from the surface, as well as any built up dirt and grease. If the surface does not meet the requirements, old layers of paint, which should adhere to the substrate well and endure the adhesiveness of the new finish, must be removed mechanically. When working on mineral textures that have never been painted, ensure they are clean and free of defects (new plasters should be painted after 3-4 weeks of stabilisation or after the time indicated by the producer of the plaster, putty, filler, etc.)

In order to achieve a level and homogeneous surface on a given substrate, the work should be performed by a single person using the same tools, with a short application time (without pauses) for each coat so the whole wall may be covered with wet paint.

The final effect depends on the user's skills, tools, and the amount of product applied. Therefore, the efficiency, samples, and other parameters presented here are illustrative and approximate only, calculated based on several years of experience and research, applicable to optimal climatic conditions (approx. +23°C and 65% humidity). The parameters may change in other conditions. However, due to a great variety of substrates and application conditions, it is necessary to verify the product and its effectiveness by testing it individually under given conditions.

If the surface requires washing, the whole wall must be washed with similar motions and using the same tools and liquids. Wash the tools with water immediately after use. ECORSON is not responsible for non-intended use of the product and uses inconsistent with the principles, also when used beyond our reasonable control.

Ecology: does not contain lead, chromium, and mercury. Does not require any marking to identify toxicity or danger to human health in accordance with CE standards and classification.

THE PRODUCT COMPLIES WITH THE POLISH AND EUROPEAN STANDARDS: PN-EN 15824

ISO 9001:2009 PN-EN Certificate No.: 1323/02/2014/J/C

  1. COLOR PALETTE
    • OXIDECOR E
CalculatorPZH CertificateSafety Data SheetRETURN

Specifications

Drying time: Completely after 6-8h
Numbers of layers: 1 or 2
Colors: according to the product template
Packaging: 1KG/ 3KG/ 5KG/ 25KG
Storage: +5oC - +30oC
Temp. application: +10oC - +30oC
Efficiency: 1m2/kg per coat
Application: indoors and outdoors
Imposition: trowel, brush (wide brush), roller
Thinning: ready to use or 5-25%
Customs tariff: 32091000
Consuption: 1kg/m2 per coat

facebook