JĘZYK / LANGUAGE / ЯЗЫК
ABOUT USNewsContactStudyGalleryGuideLogIn

OXIDECOR EXTRA FINE

Corrosion effect, can be applied by spraying

The compound contains fine-grained metal and enables you to create a perfectly smooth surface. Can be applied indoors and outdoors to various buildings and their surrounding architecture. Why is it different from Oxidecor E? Due to its unique composition and selected grains, the product can be sprayed or applied with a trowel or a brush to all types of substrate, such as: walls, radiators, doors, metal, handles, plastic, wood, wood imitation, furniture boards, lamps, cars, bicycles, motorcycles, garden architecture, etc. 

Characteristics/Benefits

  • 100% natural oxidised look,
  • very efficient,
  • smooth to the touch,
  • multi-purpose, 
  • EXCELLENT resistance to impact, 
  • good filling properties, durable and practical, 
  • good adhesiveness to various substrates, 
  • resistant to scrubbing – used in a system.

Each finish is unique and original!

Decorative coat

The decoration consists of:

  1. Base coatproper base should be selected according to the absorbency or adhesiveness evaluation: MFA Classic – to absorbent substrates, Primer E – to improve adhesiveness, Brunox Epoxy – to metal,
  2. Oxidecor Extra Fine – specialist decorative compound with metals
  3. Aktywator New – activating agent which provides an original corrosion effect. Each application results in a different reaction and contact with the surface due to numerous factors present at a given time, i.e. temperature, sunlight, humidity, drafts, etc.

General application principles

All work on a given substrate should be performed and finished with products from the same production batch, with the same serial number, as there may be slight differences in the base that may affect the final colour and effect. The instructions to perform the work in a professional manner are based on basic occupational health and safety rules, and guidelines described in the following sheets: technical, application system, adapting work to conditions (i.e. temperature, humidity, drafts, etc.), and proper surface preparation.

Before we begin painting, it is very important to verify the technical condition of the substrate and follow the guidelines related to its proper preparation. The substrate should be: stable, dry, cleaned, all cavities should be filled and any fungi should be removed if necessary. Dust must be removed from the surface, as well as any built up dirt and grease. If the surface does not meet the requirements, old layers of paint, which should adhere to the substrate well and endure the adhesiveness of the new finish, must be removed mechanically. When working on mineral textures that have never been painted, ensure they are clean and free of defects (new plasters should be painted after 3-4 weeks of stabilisation or after the time indicated by the producer of the plaster, putty, filler, etc.)

In order to achieve a level and homogeneous surface on a given substrate, the work should be performed by a single person using the same tools, with a short application time (without pauses) for each coat so the whole wall may be covered with wet paint.

The final effect depends on the user's skills, tools, and the amount of product applied. Therefore, the efficiency, samples, and other parameters presented here are illustrative and approximate only, calculated based on several years of experience and research, applicable to optimal climatic conditions (approx. +23°C and 65% humidity). The parameters may change in other conditions. However, due to a great variety of substrates and application conditions, it is necessary to verify the product and its effectiveness by testing it individually under given conditions.

If the surface requires washing, the whole wall must be washed with similar motions and using the same tools and liquids. Wash the tools with water immediately after use. ECORSON is not responsible for non-intended use of the product and uses inconsistent with the principles, also when used beyond our reasonable control.

Ecology: does not contain lead, chromium, and mercury. Does not require any marking to identify toxicity or danger to human health in accordance with CE standards and classification.

ISO 9001:2009 PN-EN Certificate No.: 1323/02/2014/J/C

  1. COLOR PALETTE
    • OXIDECOR E
CalculatorPZH CertificateSafety Data SheetRETURN

Specifications

Drying time: 6-8h
total resistance after 28 days
Numbers of layers: 1
Colors: according to the product template
Packaging: 1KG/ 3KG/ 5KG/ 25KG
Storage: +5oC - +30oC
Temp. application: +10oC - +30oC
Efficiency: 4-5m2/kg per coat (spraying)
2-2,5m2/kg per coat (trowel or paint brush)
Application: indoors and outdoors
Bases: -
Imposition: spraying(dysza 2,5),
trowel, paint brush
Thinning: spraying - 20-30%
trowel - ready to use
pędzel - 10-20% paint brush
Customs tariff: 32091000
Consuption: 0,2-0,25 kg/m2 per coat (spraying)
0,4-0,5 kg/m2 per coat (trowel or paint brush)

błąd w pytaniu