ABOUT USNewsContactStudyGalleryGuideLogIn


Innovative and elegant effect of natural travertine. Requiring several application techniques, the final effect resembles the "geological structure" of the Earth. Can be pigmented in accordance with catalogue colours, pastel, or some of the intense colours. Provides an elegant and noble finish that creates an interesting, interfusing 3-dimensional matt and satin texture. Complements all designs, makes them more vivid and adds a finishing touch. Creates an alkaline environment and facilitates easy removal of moisture from the walls in order to prevent fungi, moulds, and other micro-organisms from growing.

Application requires a flat and well-prepared substrate. Made of ecological, fine-grained Calce Marmorino mineral plaster. The product dries quickly, therefore the second layer can be applied to the first, drying one. This gives us more time to work on the material, crucial while applying the plaster to large surfaces. Intended for indoor and outdoor use. We recommend coating the final effect with Lumicca Incolore preservative paint (twice if outdoors) in order to bring out the pattern subtly and protect the decoration against dirt and soaking. The surface is highly resistant to washing and scrubbing, the natural components provide excellent water vapour permeability and prevent fungi and moulds from growing. Perfect for interiors exposed to water vapour and dirt, such as kitchens, bathrooms, and busy public interiors.


Thanks to its resistance to impact and abrasion, and good washability, it is recommended for surfaces exposed to dirt and mechanical damage, all kinds of busy public utility places, such as halls, corridors, passageways, dining rooms, bars, kitchens, living rooms, fireplaces, garages, houses, as well as in places where children and animals are present. Due to its high permeability, natural origin, alkalinity, and possibility of washing and scrubbing, it is recommended for areas for sensitive groups of people (ill or elderly people, children) and for the following interiors: kitchens, bathrooms, laundries, boiler rooms, drying rooms, restaurants, bars, public utility places such as hospitals, health centres, outpatient clinics, sanatoriums, schools, preschools, nursery schools, nursing homes, hospices, orphanages, spas, etc. Recommended for plasters on various substrates, such as mixed plasters (cement, lime, mixture), concrete, cement, gypsum-carton boards. In private and public utility interiors: walls, gypsum-carton boards, rusticated surfaces, slanted and horizontal ceilings, in rooms where an appropriate atmosphere is desired, In public utility facilities, i.e. hotels, stores, restaurants, offices, food industry, warehouses, storage rooms, etc. All kinds of prestigious locations, i.e. conference rooms, concert halls, theatres, cinemas, etc.,

Recommended for indoor and outdoor applications:

  • maintenance and restoration works including smoothing plaster and old paint,
  • new houses in accordance with the criteria of "Eco-Friendly, Green Construction".
  • renovation of old buildings that require a dehumidification system.

WHAT IS IMPORTANT, Travertino can be applied directly to cement-lime plasters and machine-applied plaster. It does not require applying gypsum putty or levelling the surface. Recommended for all kind of substrates and prepared plasters.


  • alkaline, prevents fungi, moulds, and other micro-organisms from growing.
  • resistant to washing and scrubbing when used in a system and preserved,
  • extended working time,
  • high water vapour permeability,
  • durable colour,
  • natural product and colour,

Decorative coat

Travertino Naturale is a dry product, add approx. 25% water before use and stir thoroughly. Distribute a base layer of plaster with an INOX trowel, creating a grain-thick layer and smoothing out with a trowel, pressing it flat against the substrate. The work should be performed in stages. Leave to dry after application.

Add approx. 25% water before use and stir thoroughly. When dry, apply another layer in horizontal stripes, leaving visible gaps. Produce the pattern by picking out longitudinal stripes of the compound with a narrow spatula. Create pits on the edges by hitting the surface with a hard brush. Fill the cavities alternatingly using the Damascato effect, tearing off the compound with another trowel repeatedly. It allows you to create a pattern on the trowel that you can later apply to the substrate to achieve a regular pattern. During another pause in application, apply the effect of horizontal overlapping layers of plaster from the edge of the trowel.

Approx. 30 minutes after application (depending on the temperature),  smooth out each the plaster with a trowel before it dries. The work should be performed in stages.


When selecting colours for a given interior, several factors must be taken into account as they affect our perception of the colours, aesthetics, and our mood. The swatches and the catalogues available on the market are for illustration purposes only, frequently in the form of a photography of the colour printed on single quality paper (glossy or matt) and do not represent the actual perception of the final effect. ECORSON produces original colour and texture samples of individual products to make the choice easier. Keep in mind that small, ready colours or textures in swatches may slightly differ visually from final effects in particular interiors. If you lack colour intuition, we recommend making a larger sample or hiring a Designer or Decorator who can suggest individual and appropriate choices. Keep in mind that the colour on a small swatch (even an original one) may look different on a large surface due to a number of factors such as other nearby colours that dominate the room (barely visible colour of glass panes, floor, furniture,… etc.), the amount of sunlight and the time of day, direction, the type of artificial light (warm or cold, scattered or beam), and distribution of the colour. The same rule applies while selecting colours and painting outdoors as we are close to nature and affected by it. All these factors saturate the walls with their colours, tones, and shades (and vice versa), interfuse, and create collages, often beautiful. It must be taken into consideration when selecting colours. Our perception of colours is significantly affected by light. We do not recommend applying two different colours or products on corners as the colour should be determined by the shape. Have fun with colours and textures, remember that they can change a lot in our interiors, for example affect the perception of size and distance, add warmth and cosiness, or create a cold and fresh appearance. The colour and the texture may cause desired feelings and affect our mood. As it is our passion, we wish to share it with you. ECORSON team.


General application principles

All work on a given substrate should be performed and finished with products from the same production batch, with the same serial number, as there may be slight differences in the base that may affect the final colour and effect. The instructions to perform the work in a professional manner are based on basic occupational health and safety rules, and guidelines described in the following sheets: technical, application system, adapting work to conditions (i.e. temperature, humidity, drafts, etc.)…, and proper surface preparation.

Before we begin painting, it is very important to verify the technical condition of the substrate and follow the guidelines related to its proper preparation. The substrate should be: stable, dry, cleaned, all cavities should be filled and any fungi should be removed if necessary. Dust must be removed from the surface, as well as any built up dirt and grease. If the surface does not meet the requirements, old layers of paint, which should adhere to the substrate well and endure the adhesiveness of the new finish, must be removed mechanically. When working on mineral textures that have never been painted, ensure they are clean and free of defects (new plasters should be painted after 3-4 weeks of stabilisation or after the time indicated by the producer of the plaster, putty, filler, etc.)

In order to achieve a level and homogeneous surface on a given substrate, the work should be performed by a single person using the same tools, with a short application time (without pauses) for each coat so the whole wall may be covered with wet paint.

The final effect depends on the user's skills, tools, and the amount of product applied. Therefore, the efficiency, samples, and other parameters presented here are illustrative and approximate only, calculated based on several years of experience and research, applicable to optimal climatic conditions (approx. +23°C and 65% humidity). The parameters may change in other conditions. However, due to a great variety of substrates and application conditions, it is necessary to verify the product and its effectiveness by testing it individually under given conditions.

If the surface requires washing, the whole wall must be washed with similar motions and using the same tools and liquids. Wash the tools with water immediately after use. ECORSON is not responsible for non-intended use of the product and uses inconsistent with the principles, also when used beyond our reasonable control.


How-to videoCalculatorApplication SheetRETURN


System: MFA Classic/ Bucciato/Travertino Naturale/ Lumicca Incolore/ Lumicca Base (optional)
Drying time: MFA Classic: 4-6h
Bucciato: 5h
Calce Marmorino: 12h
Traverrtino Naturale: 12h
Lumicca Incolore: 5h
Lumiccca Base: 12h
Numbers of layers: 5 or 6
Colors: uncoloured
Packaging: MFA Classic: 1L/ 5L/ 20L
Bucciato: 1KG/ 3KG/ 5KG/ 25KG
Travertino Naturale: 1KG/5KG/ 16KG
Lumicca Incolore: 1L/ 3L/ 5L/ 14L
Lumicca Base: 1L/ 3L/ 5L/ 14L
Storage: +5oC - +30oC
Temp. application: all products +10oC - +30oC
Consuption: MFA Classic: 0,03 l/m2
Bucciato: 0,14-0,2 kg/m2
Traverino Naturale: 1,2 kg/m2
Lumicca Incolore: 0,05-0,06 l/m2
Lumicca Base: 0,06-0,08 l/m2
Efficiency: MFA Classic: 30-40m2/l
Bucciato: 5-7m2/kg
Traverino Naturale: 0,8m2/kg
Lumicca Incolore: 15-20m2/l
Lumicca Base: 12-15m2/l
Application: indoors and outdoors
Imposition: brush (wide brush), trowel, euromal
Thinning: MFA Classic: 3l of water per 1l of product
Bucciato: 30%
Travertino Naturale:For the current use of dry matter add about 25% of water

Lumicca Incolore: 100-150%
Lumicca Base: 30-50%