ABOUT USNewsContactStudyGalleryGuideLogIn


A fashionable concrete effect applied to floors, used widely in interior designing or as an alternative for traditional tiles or a parquet. The finish can be applied to the whole floor, we can also create natural expansion effects or various patterns, inscriptions, pits, and rubs. An original colour catalogue is available with the latest Beton Calce trends. The product can come in any colours. 


  • all kinds of surfaces in flats,
  • private houses,
  • suites,
  • stores,
  • medium-busy offices, etc.


Not only is a concrete floor fashionable, but it also provides multiple advantages:

  • does not require using grout or connections,
  • the same product (in different, identical, or similar colours and textures) can be applied to all surfaces in a given interior, such as stairs, walls, slanted ceilings, furniture systems, rusticated surfaces, floors (after preservation),
  • recreating individual patterns and details integrates the interior and makes it consistent,
  • does not sidetrack us from important decorations – floor, walls, and stairs can act as a background,
  • goes well with other natural materials, such as wood, metal, glass, ceramics, and stone,
  • enables us to create individual and unlimited designs,
  • should you decide to redecorate the room, it allows you to do it faster than when the floor is covered with other materials,
  • original and durable decoration for contemporary, industrial, and modern interiors.

The system consists of Beton Calce – special, ecological, and mineral medium-grained decorative plaster coated with Epoxon Transparent (which consists of 2 components: varnish and hardener) – protective preservative and ceramic satin varnish.

Decorative coat

Apply Beton Calce to a dry base layer in a system, producing the desired pattern with a trowel. The work should be performed in stages so that the layers bind while wet. Particles and minerals of various grain create natural small pores on the surface which provide a concrete-like texture. Depending on the final effect and the coated area, additional effects of expansion and other patterns can be produced. Smooth out the drying layer and protect with Epoxon Transparent.


When selecting colours for a given interior, several factors must be taken into account as they affect our perception of the colours, aesthetics, and our mood. The swatches and the catalogues available on the market are for illustration purposes only, frequently in the form of a photography of the colour printed on single quality paper (glossy or matt) and do not represent the actual perception of the final effect. ECORSON produces original colour and texture samples of individual products to make the choice easier. Keep in mind that small, ready colours or textures in swatches may slightly differ visually from final effects in particular interiors. If you lack colour intuition, we recommend making a larger sample or hiring a Designer or Decorator who can suggest individual and appropriate choices. Keep in mind that the colour on a small swatch (even an original one) may look different on a large surface due to a number of factors such as other nearby colours that dominate the room (barely visible colour of glass panes, floor, furniture, etc.), the amount of sunlight and the time of day, direction, the type of artificial light (warm or cold, scattered or beam), and distribution of the colour. The same rule applies while selecting colours and painting outdoors as we are close to nature and affected by it. All these factors saturate the walls with their colours, tones, and shades (and vice versa), interfuse, and create collages, often beautiful. It must be taken into consideration when selecting colours. Our perception of colours is significantly affected by light. We do not recommend applying two different colours or products on corners as the colour should be determined by the shape. Have fun with colours and textures, remember that they can change a lot in our interiors, for example affect the perception of size and distance, add warmth and cosiness or create a cold and fresh appearance. The colour and the texture may cause desired feelings and affect our mood. As it is our passion, we wish to share it with you. ECORSON team.

General application principles

All work on a given substrate should be performed and finished with products from the same production batch, with the same serial number, as there may be slight differences in the base that may affect the final colour and effect. The instructions to perform the work in a professional manner are based on basic occupational health and safety rules, and guidelines described in the following sheets: technical, application system, adapting work to conditions (i.e. temperature, humidity, drafts, etc.), and proper surface preparation.

Before we begin painting, it is very important to verify the technical condition of the substrate and follow the guidelines related to its proper preparation. The substrate should be: stable, dry, cleaned, all cavities should be filled and any fungi should be removed if necessary. Dust must be removed from the surface, as well as any built up dirt and grease. If the surface does not meet the requirements, old layers of paint, which should adhere to the substrate well and endure the adhesiveness of the new finish, must be removed mechanically. When working on mineral textures that have never been painted, ensure they are clean and free of defects (new plasters should be painted after 3-4 weeks of stabilisation or after the time indicated by the producer of the plaster, putty, filler, etc.)

In order to achieve a level and homogeneous surface on a given substrate, the work should be performed by a single person using the same tools, with a short application time (without pauses) for each coat so the whole wall may be covered with wet paint.

The final effect depends on the user's skills, tools, and the amount of product applied. Therefore, the efficiency, samples, and other parameters presented here are illustrative and approximate only, calculated based on several years of experience and research, applicable to optimal climatic conditions (approx. +23°C and 65% humidity). The parameters may change in other conditions. However, due to a great variety of substrates and application conditions, it is necessary to verify the product and its effectiveness by testing it individually under given conditions.

If the surface requires washing, the whole wall must be washed with similar motions and using the same tools and liquids. Wash the tools with water immediately after use. ECORSON is not responsible for non-intended use of the product and uses inconsistent with the principles, also when used beyond our reasonable control.

    • BETONY
How-to videoCalculatorApplication SheetRETURN


System: MFA Plus/ Primer EG/ Calce Marmorino/ Beton Calce/ Epoxon Fondo A+B / Epoxon A + B Transparent Gloss / Epoxon A + B Transparent Gloss or Epoxon A + B Transparent Satin
Drying time: MFA Plus: 7-8h
Primer EG: 5-8h
Bucciato: 5h
Calce Marmorino: 8h
Beton Calce: 8h
Epoxon Fondo A+B - next layer: 20 - 48h,
Epoxon A+B Transparent Gloss- next layer: 20 - 48h,
Epoxon A+B Transparent Gloss or Satin- next layer: 20 - 48h,
Full resistance after 7 days after last layer of system.
Numbers of layers: 7
Colors: according Beton, Calce Marmorino template.
nuances of color according to the Jeans or Lumicca Base template
Packaging: MFA Plus: 1L/ 5L/ 20L
Primer EG: 1KG/ 3KG/ 5KG/ 20KG
Calce Marmorino: 1KG/ 3KG/ 5KG/ 25KG
Beton Calce: 1KG + 0,15KG/ 3KG +0,45KG/ 5KG + 0,75KG/ 25KG + 3,75KG
Epoxon Fondo A+B: 1KG(A)+ 0,21KG(B) / 3KG(A)+0,63KG(B) / 5KG(A)+1,05KG(B)
Epoxon A+B Transparent Gloss: 0,5KG(A) +0,125KG(B) / 1KG(A) + 0,25KG(B) / 3KG(A) + 0,75KG(B) / 5KG(A) + 1,25KG(B)
Epoxon A+B Transparent Gloss lub Satin 0,5KG(A) +0,125KG(B) / 1KG(A) + 0,25KG(B) / 3KG(A) + 0,75KG(B) / 5KG(A) + 1,25KG(B)
Storage: +5oC - +30oC
Temp. application: all products +10oC - +30oC
Consuption: MFA Plus: 0,03-0,1 l/mm2/l
Primer EG: 0,2-0,25 kg/m2
Calce Marmorino: 0,7 kg/m2
Beton Calce: 1,8-2 kg/m2
Epoxon Fondo A+B: 0,1-0,11 kg/m2
Epoxon A+B Transparent Gloss:0,07 kg/m2
Epoxon A+B Transparent Gloss or Satin 0,07 kg/m2
Efficiency: MFA Plus: 10-30m2/l
Primer EG: 4-5m2/kg
Calce Marmorino: 1,7m2/kg
Beton Calce: 0,5-0,55m2/kg
Epoxon Fondo A+B: 9-10m2/kg
Epoxon A+B Transparent Gloss:13m2/kg
Epoxon A+B Transparent Gloss or Satin 13m2/kg
Application: indoors
Imposition: brush (wide brush), trowel, roller
Thinning: MFA Plus: max. 3l of water per 1l of product
Primer EG: 10-15%
Calce Marmorino: ready to use
Beton Calce: ready to use
Epoxon Fondo: ready to use
Epoxon Transparent Gloss: Component A 100: 25 component B + max. 10% of water
Epoxon Transparent Gloss or Satin: Component A 100: 25 component B ready to use

błąd w pytaniu