JĘZYK / LANGUAGE / ЯЗЫК
ABOUT USNewsContactStudyGalleryGuideLogIn

ELASTOREN

Flexible and liquid paint providing protection against UV radiation and leaks

Flexible paint in a water dispersion, used for sealing and protecting various structures: roofs, ceilings, façades, etc. When dry, creates an impermeable coating. The liquid provides a professional protective and preservative coating to eliminate the issue of connections e.g. while using prefabricated foil. Very practical as it adjusts to all kinds of substrate and seals various surfaces, in particular those of a complex shape. The coating is flexible and provides excellent sealing of any outdoor substrate. Maintains its characteristics for a long time even below 0°C. Recommended for foundations, roofs, ceilings, fibre cement, and in areas exposed to water penetration and humidity. Connects, protects, and preserves various materials. Substitutes bituminous products as its flexibility does not vary depending on the temperature. Effectively penetrates the tiniest gaps in absorbent substrate, protecting it.

Applications

  • other flexible roof surfaces,
  • bituminous roof surfaces,
  • roofs and coats made from PUR foam,
  • ceilings,
  • insulation,
  • fibre cement.

Due to its excellent adhesiveness to various materials, can be used to ensure impermeability and protection of roofs made from fibre concrete, concrete structures, bituminous materials, and basements. Connects two materials, such as around a vent as a replacement for flashing. 

Ready to use. In order to achieve the best results, we recommend preparing the substrate by removing all kinds of fungi, mould, and bulk materials. Degrease the surface before painting. When applied to a dusty surface, coat with MFA Plusprimer diluted with max. 1:3 water. At least two layers of Elastoren must be applied. Ensure that the surface is dry and stable in order to prevent water pockets from forming (they would cause the paint to go off). While applying the paint to larger areas, fabric reinforcement is recommended. Wash the tools with water immediately after use.

NOTE:
Polyurethane foam roof covering surfaces must be preserved by spraying or painting with Elastoren within 14 days.

Characteristics/Benefits

  • Reduced heating level and solar energy absorption in the case of dark colours,
  • Excellent resistance to UV radiation and atmospheric agents,
  • Highly flexible, easy to apply,
  • High resistance to water penetration,
  • Excellent adhesiveness to various substrates,
  • Provides excellent sealing properties,
  • Excellent resistance to alkalis.

Colours/Selection/Rules

When selecting colours for a given interior, several factors must be taken into account as they affect our perception of the colours, aesthetics, and our mood. The swatches and the catalogues available on the market are for illustration purposes only, frequently in the form of a photography of the colour printed on single quality paper (glossy or matt) and do not represent the actual perception of the final effect. ECORSON produces original colour and texture samples of individual products to make the choice easier. Keep in mind that small, ready colours or textures in swatches may slightly differ visually from final effects in particular interiors. If you lack colour intuition, we recommend making a larger sample or hiring a Designer or Decorator who can suggest individual and appropriate choices. Keep in mind that the colour on a small swatch (even an original one) may look different on a large surface due to a number of factors such as other nearby colours that dominate the room (barely visible colour of glass panes, floor, furniture, etc.), the amount of sunlight and the time of day, direction, the type of artificial light (warm or cold, scattered or beam), and distribution of the colour. The same rule applies while selecting colours and painting outdoors as we are close to nature and affected by it. All these factors saturate the walls with their colours, tones, and shades (and vice versa), interfuse, and create collages, often beautiful. It must be taken into consideration when selecting colours. Our perception of colours is significantly affected by light. We do not recommend applying two different colours or products on corners as the colour should be determined by the shape. Have fun with colours and textures, remember that they can change a lot in our interiors, for example affect the perception of size and distance, add warmth and cosiness, or create a cold and fresh appearance. The colour and the texture may cause desired feelings and affect our mood. As it is our passion, we wish to share it with you. ECORSON team.

General application principles

All work on a given substrate should be performed and finished with products from the same production batch, with the same serial number, as there may be slight differences in the base that may affect the final colour and effect. The instructions to perform the work in a professional manner are based on basic occupational health and safety rules, and guidelines described in the following sheets: technical, application system, adapting work to conditions (i.e. temperature, humidity, drafts, etc.), and proper surface preparation.

Before we begin painting, it is very important to verify the technical condition of the substrate and follow the guidelines related to its proper preparation. The substrate should be: stable, dry, cleaned, all cavities should be filled and any fungi should be removed if necessary. Dust must be removed from the surface, as well as any built up dirt and grease. If the surface does not meet the requirements, old layers of paint, which should adhere to the substrate well and endure the adhesiveness of the new finish, must be removed mechanically. When working on mineral textures that have never been painted, ensure they are clean and free of defects (new plasters should be painted after 3-4 weeks of stabilisation or after the time indicated by the producer of the plaster, putty, filler, etc.)

In order to achieve a level and homogeneous surface on a given substrate, the work should be performed by a single person using the same tools, with a short application time (without pauses) for each coat so the whole wall may be covered with wet paint.

The final effect depends on the user's skills, tools, and the amount of product applied. Therefore, the efficiency, samples, and other parameters presented here are illustrative and approximate only, calculated based on several years of experience and research, applicable to optimal climatic conditions (approx. +23°C and 65% humidity). The parameters may change in other conditions. However, due to a great variety of substrates and application conditions, it is necessary to verify the product and its effectiveness by testing it individually under given conditions.

If the surface requires washing, the whole wall must be washed with similar motions and using the same tools and liquids. Wash the tools with water immediately after use. ECORSON is not responsible for non-intended use of the product and uses inconsistent with the principles, also when used beyond our reasonable control.

  1. COLOR PALETTE
    • ECORSON AP OFF WHITE
    • ECORSON AP PASTELLO
    • ECORSON AP CLEAN & BRIGHT
    • ECORSON AP NEUTRAL & NATURAL
    • ECORSON AP SOFT & MUTED
    • ECORSON AP ACCENTS
CalculatorPZH CertificateSafety Data SheetTechnical SheetRETURN

Specifications

Drying time: the next layer after 8-10h
total resistance afte 28 days
Numbers of layers: 2
Colors: according to the template Ecorson AP
Packaging: 5KG/ 20KG
Storage: +5oC - +30oC
Temp. application: +10oC - +30oC
Efficiency: 7-10m2/kg per coat
Application: indoors
Bases: bianco/pastello, incolore, alu
Imposition: roller, brush (wide brush), paint brush, spraying
Thinning: ready to use or 0-10%
Customs tariff: 32091000
Consuption: 0,1-0,142 kg/m2 per coat

błąd w pytaniu